Image

Aquaculture finishes for marine life


We know that one of the key factors that managers and designers for zoos and aquariums must consider is the proper coating for your facility. The coating must be not only attractive but durable, easy to maintain, and, most importantly, safe for wildlife. That's why we created aquaticLIFE™ Coatings for Marine Life. aquaticLIFE™ is a polyethylene coating with a patented installation system that is UV stable, chemical resistant, and the only aquatic coating that comply with NSF / ANSI 61 Drinking Water System Components - Health Effects.
Image

Kona Coast

Image

Blue Mist

Image

Blue Lagoon

Image

Mediterranean Blue

Image

Midnight Blue

Image

Sahara Sand

Image

Blue Granite

Image

Grey Reef

Image

French Grey

Image

Perle Noir

Image

Santorini

Image

Commercial White

Image

Commercial Blue

*Samples displayed are a representation of the actual manufacturer’s color. Colors may vary slightly from those shown. Ask your Sales Representative for actual color samples before purchasing.

Why aquaticLIFE?


aquaticLIFE™  has unmatched abrasion, corrosion and chemical resistance. Unlike commonly used epoxy paints that sit on top of the concrete, aquaticLIFE polyethylene coating is embedded into the concrete, providing superior adhesion that is highly resistant to chipping and peeling. Aquariums and marine life containers go through a lot of use and stress, and our flexible coating is made to adjust for these dynamic changes without disbonding from its tank wall substrate. Under ASTM testing methods, a 3000-hour test revealed no visual indication of color change or gloss loss from the damaging effects of UV exposure, with a bond strength greater than 850 PSI.

Find your color


AquaticLIFE Coatings for Marine Life are available in 12 colors that range from lighter reflective colors to allow visibility at underwater viewing windows to natural mid-tone blues and greys. You and your customers will love the look, and the animals will benefit from the soft feel, the easy care, and the lower chemical usage. AquaticLIFE can be applied to new or remodeled aquatic surfaces to provide a beautiful, long-lasting finish. The cure time is just a matter of minutes, allowing quick application and return to service with minimal downtime, and during routine maintenance can be  easily power washed, even underwater.

Passes the test


Not only UV stable and chemical resistant, but with proper installation, aquaticLIFE won't chalk and the colors won't fade or bleed into the water. If the coating becomes damaged through uncommon use, it's easily repaired. Our base polymer is FDA food packaging safe. And because our coatings are certified NSF / ANSI 61  potable drinking water safe, you don't have to worry about chemicals leaching into the water, letting you breathe easier, knowing that your animals are in a safe environment.

Slip Resistant Application for aquaBRIGHT™ and polyFIBRO®


Any aquatic area with high traffic such as slide entrances, zero-entry and wading pools can safely have aquaBRIGHT™ and polyFIBRO applied to them.Our slip resistant application process for aquaBRIGHT™ and polyFIBRO® is an ideal for surfaces such as steps, benches, and beach entries to assist in the prevention of accidents at ingress or egress points in a pool. This is a special application process usingsame high quality tested materials, but just a different application process. Be sure to contact your representative for more details. *

*If you are looking for the non skid abrasive coating visit our ecoDUSTRIAL line. The abrasive coatings are not recommended for aquatic entryways or features.

Image
Image
Image
Image

Our Warranty


Warranty