Find an Installer
polyFIBRO®
polyFIBRO® is a scientifically formulated aquatic coating devised to tackle the issues of traditional gel-coat finishes. The thermo-polymer coating is long lasting and does not chip, peel or crack like traditional gel-coat and paint finishes. Also the variety of colors and custom colors is more high-end in appearance and easier to apply than gel-coating. polyFIBRO® is the line of aquatic fiberglass coating swimming pools that will transform your pool or spa into a high end super low maintenance focal point. For concrete coatings, inquire about our aquaBRIGHT swimming pool finishes.
* The full range of ecoFINISH colors is available for all ecoFINISH-suitable surfaces, However, approved surfaces require different preparation methods.
Download Our Bifold
Easily Repairable
New high gloss and multi-dimensional gel-coats are only able to be installed in new factory fiberglass pools. There is no ability to repair a pool damaged during installation, transport, or every day usage. Contrary to conventional coatings, polyFIBRO® finishes are easily repairable.
Will Not Blister
polyFIBRO® thermo-polymer coating will not blister like traditional gel coatings and paints.
Fill Immediately
Why wait over a week to fill your pool? Fill immediately and enjoy your fiberglass swimming pool. No more worrying about your pool floating, lifting, or popping out of the ground while empty during the gel-coat curing process.
A Truly Flexible Coating
Gel-coats and paints are very brittle when cured, movement in the pool shell can result in the coating cracking. polyFIBRO® is a high flexible coating that can withstand the movement of the fiberglass pool shell, making it an ideal option for your residential or commercial pool resurfacing.
Pick a Color, Any Color
Re-Gel coating a pool limits you to light colors: white, baby-blue, tan, light grey etc…polyFIBRO® can be applied in any color you choose from our standard ecoFINISH® color palette to custom colored coatings for both polyFIBRO® and aquaBRIGHT™ installation. All standard polyFIBRO® coatings are one amazing low price, so choose away and pick what you like and not what you can afford.
Slip Resistant Application for aquaBRIGHT™ and polyFIBRO®
Any aquatic area with high traffic such as slide entrances, zero-entry and wading pools can safely have aquaBRIGHT™ and polyFIBRO applied to them. Our slip resistant application process for aquaBRIGHT™ and polyFIBRO® is an ideal for surfaces such as steps, benches, and beach entries to assist in the prevention of accidents at ingress or egress points in a pool. This is a special application process using the same high quality tested materials, but just a different application process. Be sure to contact your representative for more details. *
*If you are looking for the non skid abrasive coating visit our ecoDUSTRIAL line. The abrasive coatings are not recommended for aquatic entryways or features.
